The GSZC18 series of heat pump provides great efficiency, gives you the benefits of smart home technology and can be used with a wide range of thermostats.
This Goodman partial split multi-positionHeat Pump system comes with a heat pump (model GSZC180361), and a coil (model CAPF4961C6) along with the appropriate TXV (model TX3N4). These components will need to be paired with an air handler / blower or a furnace to make a complete system.
The details for these parts can be found below.
This package combination was certified under AHRI number 205358327 to function at 18.5 SEER and provide 36000 BTUs of cooling.
These pieces come with a 10-year parts limited warranty provided it is installed by a qualified installer and registered online within 60 days of installation. (Online registration is not required in California and Quebec)
Accessories sold separately.
If you need to ask us a question about this listing, please be sure to include the SKU number (#GSZC180361 CAPF4961C6 TX3N4)
GSZC180361 – Standard Features:
Factory-installed filter drier
Fully charged for 15′ of tubing length
Copper tube/aluminum fin coil
Service valves with sweat connections and easy-access gauge ports
Contactor with lug connection
Ground lug connection
Heavy-gauge galvanized-steel cabinet with louvered sound control top
Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
Wire fan discharge grille
Steel louver coil guard
Single-panel access to control with space provided for field-installed accessories
When properly anchored, meets the 2017 Florida Building Code unit integrity requirement for hurricane-type winds (Anchor bracket kits sold separately.)
Please consult with your local professional to confirm this is suitable for your application. All accessories are sold separately, feel free to contact us with any questions.
Dimentions – 35 1/2″ W x 35 1/2″ D x 34 5/8″ H
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
CAPF4961C6 – Standard Features:
All-Aluminum evaporator coil
Optimized for use with R-410A refrigerant
Check flowrator for cooling and heat pump applications
Foil-faced insulation covers the internal casing to reduce cabinet condensation
Galvanized, leather grain-embossed finish case
Rust resistant, thermoplastic drain pans featuring a low water-retention design
DecaBDE-free thermoplastic drain pan with secondary drain connections
UV-resistant drain pan
NOTE: These coils are not for use on oil furnaces or any other application where the temperature on the drain pan may exceed 300 degrees F. If these coils are used for applications were high temperature threatens or jeopardizes the durability of the drain pan, you must replace the factory-installed drain pan with a high-temperature drain pan, which are available as kits as field-installed accessories
Dimentions – 21″ W x 21.125″ D x 30″ H