Goodman 18.5 SEER 2.0 TON 80% AFUE, Low NOx complete split heat pump system (GSZC180241 CAPF3137B6 GMVC800603BX TX2N4A)

$4,203.00

INCLUDED PARTS – This package contains the Goodman GSZC180241 heat pump, the CAPF3137B6 evaporative coil, the GMVC800603BX furnace and the matching TXV.
SEER and TONNAGE – This is a 18.5 SEER package with a 2.0 TON rating.
WARRANTY – These units comes with a 10-year parts limited warranty provided it is installed by a qualified installer and registered online within 60 days of installation. (Online registration is not required in California and Quebec) (Installation not included)
ALL ACCESSORIES – Electrical Disconnect, Condenser Pads, Thermostats, Linesets, LP converstion kits etc SOLD SEPARATELY
SHIPPING – Please note this product ships by freight carrier, a valid phone number is needed to schedule delivery.

Only 4 left in stock

SKU: #GSZC180241CAPF3137B6GMVC800603BXTX2N4A Category: Brand:

Description

The GSZC18 series of heat pump provides great efficiency, gives you the benefits of smart home technology and can be used with a wide range of thermostats.

The furnace in this bundle works at 80% efficiency and uses a variable speed blower. The variable speed blower will give you more consistent heating and cooling with a reduction in noise. With a two-stage burner this furnace operates quieter and generates more even heat through your home. With a two-stage burner you’ll notice the temperature dip less before the longer heating cycle kicks in. This helps provide better air filtration since air is moving more regularly and gives you a great balance between cost and long-term value.

This Goodman complete split upflow Heat Pump system comes with a heat pump (model GSZC180241), a coil (model CAPF3137B6), furnace (model GMVC800603BX), and the appropriate TXV (model TX2N4A). The details for these parts can be found below.

This system does comply with the California Low NOx regulations but is not for installation in California’s SCAQMD

This package combination was certified under AHRI number 204645897 to function at 18.5 SEER and provide 23800 BTUs of cooling and 60000 BTUs of heating.

These pieces come with a 10-year parts limited warranty provided it is installed by a qualified installer and registered online within 60 days of installation. (Online registration is not required in California and Quebec)

Accessories sold separately.

If you need to ask us a question about this listing, please be sure to include the SKU number (#GSZC180241 CAPF3137B6 GMVC800603BX TX2N4A)

GSZC180241 – Standard Features:
Energy-efficient compressor
Single-speed condenser fan motor
Factory-installed filter drier
Copper tube/aluminum fin coil
Service valves with sweat connections and easy-access gauge ports
Contactor with lug connection
Ground lug connection
Heavy-gauge galvanized-steel cabinet with louvered sound control top
Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
Steel louver coil guard
Single-panel access to control with space provided for field-installed accessories
When properly anchored, meets the 2017 Florida Building Code unit integrity requirement for hurricane-type winds (Anchor bracket kits sold separately.)
Please consult with your local professional to confirm this is suitable for your application. All accessories are sold separately, feel free to contact us with any questions.
Dimentions – 35 1/2″ W x 35 1/2″ D x 40″ H

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

CAPF3137B6 – Standard Features:
All-Aluminum evaporator coil
Optimized for use with R-410A refrigerant
Check flowrator for cooling and heat pump applications
Upflow/downflow coil
Foil-faced insulation covers the internal casing to reduce cabinet condensation
Galvanized, leather grain-embossed finish case
Rust resistant, thermoplastic drain pans featuring a low water-retention design
DecaBDE-free thermoplastic drain pan with secondary drain connections
UV-resistant drain pan

NOTE: These coils are not for use on oil furnaces or any other application where the temperature on the drain pan may exceed 300 degrees F. If these coils are used for applications were high temperature threatens or jeopardizes the durability of the drain pan, you must replace the factory-installed drain pan with a high-temperature drain pan, which are available as kits as field-installed accessories
Dimentions – 17.5″ W x 21.125″ D x 30″ H

GMVC800603BX – Standard Features:
Integrated communicating ComfortBridge Technology
Two-stage gas valve provides quiet, economical heating
Commissioning and diagnostics via on board Bluetooth with the CoolCloud phone and tablet application
Efficient and quiet variable-speed ECM circulator motor gently ramps up or down according to heating or cooling demand
SureStart Silicon Nitride igniter designed for long igniter life
Self-diagnostic control board with constant memory fault code history output to a triple 7-segmet display
Low constant fan speed circulates air throughtout the home
Quiet, two-speed induced draft blower
Fully insulated, heavy-gauge steel cabinet with durable baked-enamel finish
Multi-position installation – upflow, horizontal left or right
Convenient left or right connection for gas/electric service
Cabinet air leakage of 2% or less
Coil and furnace fit flush for most installations
Removable bottom for side- or bottom-return applications
Dimentions – 33 3/8″ H x 28″ D x 17 1/2″ W

Additional information

Tonnage

2 Ton

SEER Rating

18.5 SEER

Outside Unit

Heat Pump

Inside Unit

Coil and Furnace

Cabinet Size

B

You may also like…